Product Discription

SZL Series Double Drum Chain Grate Biomass Water Boiler

SZL double drum series with biomass boiler, boiler main engine designed as a longitudinal double drum device, upper drum is a barn Drowned with a steam -water separator, the lower drum is equipped with a waste water discharge device during the specified period, and the left and right The side of the furnace is equipped with water -wall pipes. The light -chain grill automatically adds fuel and the rear part of the grill is an upright an opening chamber and a convection tube. the tail of the grill is an air conditioner or an air heater. The fan and the induced fan are distributed for mechanical ventilation and are equipped with an automatic grinder. the incinerator. The gas enters the exhaust through the furnace, the recovery chamber, the convection pipe, the air saver or heater, enters the dust collector, induces a fan, a chimney and finally released into the atmosphere.

Product Features

1. High efficiency seat:

The grate uses bilateral ventilation and drainage technology, which naturally ventilates the front of the grate, avoids air leakage, oil leakage and uneven ventilation and is easily controllable. Compared to normal growth, it has obvious advantages.

2. Comfortable dust removal:

The boiler may create several openings for the cleaning of the ash to remove the ash in a timely and effective manner, thereby avoiding operational problems caused by the accumulation of ash and by reducing the thermal efficiency and ensuring the stability of the boiler load.

3. High security:

The water supply is controlled by a computer and delivered automatically.Equipped with a lack of water, protection against excessive pressure and other devices, safe and reliable.

4. Life and life:

Boiler excellent design, advanced production equipment and strict quality controls guarantee the quality of each new boiler. The service life of a normal boiler body exceeds twenty years.

5. Environmental protection and low noise:

The initial exhaust emissions from the boiler are low and the tail of the boiler is equipped with an efficient dust collector and a low noise fan, so that the exhaust emissions meet national environmental requirements.

6. Production specifications:

Rolling stock components are manufactured in accordance with national and international standards (ISO).Each production step is carried out solely on the basis of advanced production technologies to ensure reliable product quality.

Technical Parameters

Note: the fuel consumption in the table is calculated on the basis of the low calorific value of biomass particles 17084KJ/Kg (4085Kcal/Kg). If the low calorific value of biomass fuel is larger than this value, the corresponding fuel consumption will be more economical than the value in the table.

External and Interface Dimension of SZL Biomass Hot water boiler

Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.

     It is one of the ten most famous towns in Zhongzhou, which is adjacent to National Highway 107 in the South and Beijing-Guangzhou Railway in the north. The company has the B-class boiler manufacturing license issued by the General Administration of Inspection and Quarantine of the State Quality Supervision Bureau and the D1 and D2-class pressure vessel manufacturing license. It is a comprehensive manufacturer of steam boilers, hot water boilers, heat carrier boilers, pressure vessels of Class I and II and auxiliary machines for various boilers. The company was founded in 1987.

     After relocation and expansion, it now has perfect production equipment and testing means, a high-quality staff and technical team, and has established and improved a set of quality assurance system. The quality policy of "quality-oriented, safety first, energy-saving, environmental protection, refinement" and "the pass rate of main parts inspection is over 95%, the pass rate of welding seam inspection is over 98%, the pass rate of product inspection is 100%, the pass rate of products manufactured is 100%, and the implementation rate of regulations and standards is 100%" have been formulated.

Product quality is safe and reliable, environmental protection and energy saving, and conforms to the national standards and industry standards. Pressure vessel products are inspected by the quality and technical supervision department and issued with product inspection certificate. 

Xinxiang Xinguo Container Manufacturing Co., Ltd. is willing to cooperate sincerely with friends from all walks of life to create brilliance!